Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
6. Functional description
i
You can use the DuoFern sun sensor to control multiple DuoFern
actuators (e.g. for blinds or electrical consumers) on a brightness-
dependent basis. To do this, secure the sun sensor to the window
pane using the sucker (7).
The power supply
The power supply for the DuoFern sun sensor is through a solar
cell (4) on the bottom which charges up an internal energy store.
The controls
The DuoFern sun sensor has three controls:
◆ (2) Connect button [
◆ (3) Disconnect button [
◆ (6) Rotary controller
]
]
The connect button (2) and the disconnect button (3) have mul-
tiple functions which are described in more detail in the chapters
below. The rotary controller (6) is used to adjust sensitivity to
sunlight directly on the DuoFern sun sensor.
Requirements for correct functionality:
◆ The DuoFern sun sensor needs to be fully charged (see
page 26/27).
◆ The DuoFern sun sensor needs to be registered with all
actuators required.
◆ The automated solar functions for the relevant actuator must
be activated and the sunshine position set.
◆ The actuators must be within the radio range of the DuoFern
sun sensor (10 m).
EN
23
Kapitel
Inhaltsverzeichnis
