Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
5
Description
The basic unit SPM 200 P is designed for the installation of two modules of the
SPM series. It allows the simple extension of existing installation or can be used
for 1 or 4 channels as an independent head-end. Only use the appliance in com-
bination with a stabilized adapter plug (12 V/3 A), which is also available at Poly-
tron (NG12/3000 article no. 9300610).
5.1
Installing a new module or changing a module.
Install the new module by pushing it in the guide rails to the back and pressing it
into the connection strip. Now fasten the module cover with the cross-head screw
(Figure 3/1) in front. For changing a module loosen the corresponding cross-head
screw (Figure 3/1), remove the module cover and pull out the module. Install the
new module afterwards.
NOTE
Digital modules (e.g. SPM-PS, -PST, -PT, -PTT, ...) must be put on
plug-in place 1 (on the left).
1
Figure 3
SPM-200 P
9
Inhaltsverzeichnis
