Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
EN
SAFETY WARNING: After finishing the installation and all the settings of the
operator (for Professional installers only), a measurement of the operating forces and
time to reverse the garage door must be carried out, especially when the force setting is
changed from default. Without proper measuring equipment it is not possible to ensure
it fulfills European standards EN13241-1 & EN 12453. If permissible operating forces
and the exposure times are exceeded, persons are exposed to risks of crushing,
shearing, entanglement, dragging (e.g. limbs, hair or cloths) and trapping in the opening
and closing movement of the door. Before start we advise reading chapter 7.
1. Functions
Control: one only button controls the open, stop and close. The light is on while the door
is opening or closing, three minutes later the light goes off automatically.
The unit when running is controlled by a program, that test the force on the opening and
closing movement of the door, and also any other optional security accessories.
If the force to close the door is too high, it stops and reverses the movement. The
functions for protecting the engine are overload, over hot or low power input.
DC motor: low noise, soft start, slow stopping to protect the unit and insures a long
lifecycle to the operator.
LED display: working situation is displayed on the LED screen.
Decoding: rolling code.
Manual disengagement: Insures the door opening and closing in manual mode (by
hand) without electricity.
Optional functions: Photocells and wall push-button.
2. Technical specifications
Power Input
Motor
Operating
Temperature
Relative
Humidity
Open and close
force
43
220VAC±10% 50～60Hz
24VDC
>-20ºC, <+50ºC
≦ 90%
600N / PRO600
800N / PRO800
1200N / PRO1200
Reception
frequency
Decoding
Transmitter
power
Light
Courtesy light
time
433,92MHz
Rolling Code
CR 2016 3V
Battery (x2)
LED
3 minutes
LIKE IT
Quicklinks ausblenden:
Inhaltsverzeichnis
Fehlerbehebung
