Specifications - Makita BO6030 Bedienungsanleitung
Exzenterschleifer
Vorschau ausblenden
Andere Handbücher für BO6030:
- Betriebsanleitung (41 Seiten) ,
- Bedienungsanleitung (37 Seiten) ,
- Betriebsanleitung (33 Seiten)
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Speed adjusting dial
3-1. Notches
3-2. Front grip
3-3. Hole in front grip
3-4. Screwdriver
4-1. Abrasive disc
5-1. Hex wrench
5-2. Screw
SPECIFICATIONS
Abrasive disc diameter
Orbits per minute (min
Sanding stroke rate (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Explanation of general view
5-3. Pad
6-1. Dust nozzle
6-2. Dust bag
7-1. Dust nozzle
7-2. Push button
8-1. Hook
8-2. Dust nozzle
8-3. Dust bag
8-4. Push button
10-1. Groove
Model
Pad diamter
-1
)
-1
)
Overall length
Net weight
Safety class
) : 77 dB(A)
pA
ENE052-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : sanding metal plate
ENF002-1
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
ENG905-1
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
4
10-2. Front fixing cardboard
10-3. Front side of paper dust bag
11-1. Claws
11-2. Upper part
12-1. Notch
12-2. Guide
15-1. Sponge pad
16-1. Felt pad
17-1. Wool pad
BO6030
150 mm
150 mm
4,000 - 10,000
8,000 - 20,000
309 mm
2.4 kg
/II
2
) : 4.0 m/s
h
2
ENG900-1
ENG901-1
Inhaltsverzeichnis
