Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
5.
Assembly
Assemble the fan as follows:
1. Loosen the grille mounting nut from the motor housing.
2. Position the rear grille firmly to the motor housing. Fasten
it with the mounting nut.
3. Push the fan blade along the motor shaft.
4. Hang the front grille on the rear grille using the grille
clamp. Fix the grilles together with the clips on the rim of
the front grille. Fix with the screw and nut.
Your fan is now ready for use.
6.
Use
To use the fan:
1. Place the fan on a flat and sturdy surface. Make sure no
objects (e.g. curtains) can be sucked into the rear of the
fan.
2. Insert the power plug into the mains.
3. Set the desired output speed using the speed buttons: 0 =
stop; 1 = low; 2 = high.
4. Push down the oscillation knob to make the fan oscillate.
Pull up the oscillation knob to fix the fan's direction.
5. Always switch off and unplug from the mains before
moving the fan.
6. Switch off and unplug from the mains after use.
7.
Cleaning and maintenance
Disconnect the device from the mains prior to
maintenance activities.
Clean out the parts with a soft and dry cloth. Remove
stains with a damp cloth and some mild soap. Remove
soap remnants with the damp cloth. Do not use abrasives.
V. 04 – 15/02/2018
CFAN0325N
6
©Velleman nv
Inhaltsverzeichnis
