Verfügbare Sprachen
Verfügbare Sprachen
Linksys X-Series
SSID Broadcast
When wireless clients survey the local area for wireless
networks to associate with, they will detect the SSID broadcast by the router.
To broadcast the router's SSID, keep the default, Enabled. If you do not want to
broadcast the router's SSID, then select Disabled.
5 GHz wireless settings (X3500 only)
Basic Wireless Settings (Manual) > Wireless Settings
Network Mode
Select the wireless standards your network will support.
•
Mixed
If you have Wireless-A and Wireless-N (5 GHz) devices in your
network, keep the default, Mixed.
•
Wireless-A Only
If you have only Wireless-A devices, select Wireless-A
Only.
•
Wireless-N Only
If you have only Wireless-N (5 GHz) devices, select
Wireless-N Only.
•
Disabled
If you do not have any Wireless-A and Wireless-N (5 GHz) devices
in your network, select Disabled.
NOTE
If you are not sure which mode to use, keep the default, Mixed.
Network Name (SSID)
The Service Set Identifier (SSID) is the network name
shared by all devices in a wireless network. It is case-sensitive and must not
exceed 32 keyboard characters. The default is Cisco followed by the last 5 digits
of the router's serial number, which is found on the bottom of the router. If
you used the setup software for installation, then the default Network Name is
changed to an easy-to-remember name.
NOTE
If you restore the router's factory default settings (by pressing the
Reset button or using the Administration > Factory Defaults screen),
the Network Name will return to its default value, and all devices
on your wireless network will need to be reconnected.
Security Mode
See "Security Modes"on page 15.
Channel Width
For best performance in a network using Wireless-A and
Wireless-N (5 GHz) devices, keep the default, Auto (20 MHz or 40 MHz). For a
channel width of 40 MHz, select 40 MHz only.
Standard Channel
Select the channel from the drop-down list. If you are not
sure which channel to select, then keep the default, Auto.
SSID Broadcast
When wireless clients survey the local area for wireless
networks to associate with, they will detect the SSID broadcast by the router.
To broadcast the router's SSID, keep the default, Enabled. If you do not want to
broadcast the router's SSID, then select Disabled.
Security Modes
NOTE
To learn more about any field, click Help on the right side of the
screen.
Security Option
WPA2 Personal/Enterprise
WPA2/WPA Mixed Mode
WPA Personal/Enterprise
WEP or Radius
Advanced Configuration
Strength
Strongest
WPA2: Strongest
WPA: Strong
Strong
Basic
15
Kapitel
Fehlerbehebung
