Switching on the appliance
Insert the mains plug into a socket.
D
The appliance begins to cool down as soon as it is
connected to the power supply. When the doors are
open, the interior lights come on.
Note:
The preset temperatures (factory settings) are reached
after approx. 3-5 hours. Do not put any food in the
appliance beforehand.
-
When using the fridge for the first time, the factory
setting for the fridge compartment is 5 °C.
-
When using the fridge for the first time, the factory
setting for the freezer compartment is 18 °C.
Adjust the temperature after 24 hours at the earliest
to enable the temperature in the appliance to stabilise.
To change the set temperatures > see Setting the
temperature".
Selecting the temperature
The refrigeration or freezing temperature which has been
set is permanently shown in the display.
The temperature which has been set is only reached
after a few hours.
Important information:
After setting the temperature, wait a little while before
changing it again so that the temperature inside the
appliance can stabilise itself.
Set refrigerator compartment
temperature
Setting the temperature takes place in one degree steps.
Press B (cooler) or Y (warmer) until the desired
D
temperature is shown in the display.
Set freezer compartment temperature
Setting the temperature takes place in one degree steps.
Press B (cooler) or Y (warmer) until the desired
D
temperature is shown in the display.
47