Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
On-Screen Display
Image setting
Brightness:
Adjusts the overall image and background screen brightness.
Press "+" or "-" to adjust.
Note: When backlight sensor is enabled by "Light set" selections 2 ~ 5, this function is disabled.
Contrast:
Adjusts the image brightness in relation to the background.
Press "+" or "-" to adjust.
Gamma setting
Gamma:
Allows adjustment of monitor Gamma (Grayscale tone curve).
There are six selections.
1: Gamma off
2: Gamma 1.8
3: Gamma 2.0
4: Gamma 2.2
5: Gamma DICOM Factory calibrated DICOM GSDF (Grayscale Standard Display Function)
6: Gamma User
BackLight sensor setting
Sets the output luminance of the monitor.
Light set:
Continuous brightness stabilization setting.
There are five selections.
1: Light off
2: Light 300
3: Light 400
4: Light 500
5: Light 600
System Information
Sys Info:
Provides information about the current resolution and technical data.
Includes: Horizontal and Vertical frequencies, Display resolution, The name of MCU&FPGA,
MCU (Micro Controller Unit) version (Mver) and FPGA (Field Programmable Gate Array)
version (Fver)
OSD rotate & language setting
OSD Rotation:
To switch OSD between landscape and portrait mode.
1 (Normal): Landscape mode
2 (Rotation): Portrait mode
OSD language: OSD control menus are available in seven languages.
Press "<" or ">" to select.
1: English
2: Japanese
3: German
4: French
5: Italian
6: Spanish
7: Swedish
Misc
Reset All:
Selecting Reset allows you to reset all OSD control settings.
OSD Lock Out: This control locks out access to all OSD control functions. When attempting to activate OSD controls
while in the Lock Out mode, a screen will appear indicating that the OSD controls are locked out.
To activate the OSD Lock Out function, press ENTER and hold down for at least 5 seconds.
To deactivate the OSD Lock Out function, press ENTER and hold down for at least 5 seconds while in
the OSD menu. No controls can be adjusted while in the lock out mode.
OSD Warning
No Sync:
This function gives a warning when there is no Horizontal or vertical Sync.
After power is turned on or when there is a change of input signal, the No Sync window will appear.
01_MD205MG-1_INSTALL_EN.P65
Native Gamma.
Sets the Gamma value to 1.8
Sets the Gamma value to 2.0
Sets the Gamma value to 2.2
is active.
Programmable gamma curve is active for NEC GammaCompMD software
calibration.
No backlight stabilization.
Sets brightness to 300cd/m
Sets brightness to 400cd/m
Sets brightness to 500cd/m
Sets brightness to 600cd/m
7
2
2
(Recommended setting for optimal product lifetime and performance)
2
2
English.7
7/5/08, 10:09 AM
Inhaltsverzeichnis
Fehlerbehebung
