Inhaltsverzeichnis
AXIS 2400+/2401+ Admin Manual
Installing on a Network
• Quick installation - Follow the instructions below to quickly install on an Ethernet network.
• Easy installation - See Using the AXIS IP Installer, on page 36.
• Macintosh users - Please refer to Notes for Macintosh Users, on page 35.
Connect the video output of your camera(s) to the AXIS
2400+/2401+ video port(s) using standard 75 Ohm coaxial video cable,
terminated with a BNC-connector. If your camera is supplied with a
standard phono-type (RCA) connector, use a BNC-to-RCA converter.
Note the Serial number on the
underside of the unit. You need to
know this to set the IP address.
Using an appropriate method for your operating system, assign your product with a unique IP
address from a computer on your network, as follows:
Windows only - Start a DOS window and type these commands:
Syntax:
arp -s
ping -t
Example:
arp -s 172.21.1.200 00-40-8c-10-00-86 172.21.1.193
ping -t 172.21.1.200
Note:
In some Unix systems, the arp command can be located in a directory that is not on the
command path.
You will now see '
Request timed out...
Connect an Ethernet cable to the AXIS
2400+/2401+ and attach it to the network.
UNIX only - Type this in your command line:
Syntax:
arp -s temp
ping
Example:
arp -s 172.21.1.200 00:40:8c:10:00:86 temp
ping 172.21.1.200
' messages repeatedly returned in the window.
Installing on a Network
Serial number same as
MAC/Ethernet number; e.g.
00408c100086 =
00-40-8c-10-00-86
Network socket
RJ-45 connector
9
Inhaltsverzeichnis
