Ec Declaration Of Conformity; Safety Warnings - Makita AN454 Betriebsanleitung
Vorschau ausblenden
Andere Handbücher für AN454:
- Betriebsanleitung (133 Seiten) ,
- Betriebsanleitung (89 Seiten) ,
- Betriebsanleitung (97 Seiten)
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
WARNING:
Wear ear protection.
WARNING:
The noise emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in
which the tool is used especially what kind of
workpiece is processed.
WARNING:
Be sure to identify safety
measures to protect the operator that are based
on an estimation of exposure in the actual
conditions of use (taking account of all parts of
the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
Vibration
The vibration total value determined according to
ISO11148-13(ISO8662-11):
Vibration emission (a
) : 5.7 m/s
h
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety
measures to protect the operator that are based
on an estimation of exposure in the actual
conditions of use (taking account of all parts of
the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
2
2
SAFETY WARNINGS
Pneumatic nailer/stapler safety
warnings
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in serious injury, electric shock
and/or fire.
Save all warnings and
instructions for future reference.
For personal safety and proper operation and
maintenance of the tool, read this instruction manual
before using the tool.
General safety
1.
Any other use except for intended use of this
tool is forbidden. Fastener driving tools with
continual contact actuation or contact
actuation shall only be used for production
applications.
2.
Keep fingers away from trigger when not
operating this tool and when moving from one
operating position to another.
3.
Multiple hazards. Read and understand the
safety instructions before connecting,
disconnecting, loading, operating, maintaining,
changing accessories on, or working near the
tool. Failure to do so can result in serious
bodily injury.
4.
Keep all body parts such as hands and legs
etc. away from firing direction and ensure
fastener cannot penetrate workpiece into parts
of the body.
5.
When using the tool, be aware that the fastener
could deflect and cause injury.
6.
Hold the tool with a firm grasp and be prepared
to manage recoil.
7.
Only technically skilled operators should use
the fastener driving tool.
8.
Do not modify the fastener driving tool.
Modifications may reduce the effectiveness of
safety measures and increase the risks to the
operator and/or bystander.
9.
Do not discard the instruction manual.
10.
Do not use a tool if the tool has been damaged.
11.
Be careful when handling fasteners, especially
when loading and unloading, as the fasteners
have sharp points which could cause injury.
12.
Always check the tool before use for broken,
misconnected or worn parts.
7 ENGLISH
Inhaltsverzeichnis
