4. Installing the projector on the wall mount
1)
Slide the projector plate onto the adjustment unit as shown below.
2)
Secure the projector temporarily using two M4
M4 × 12 mm hexagon socket
head cap bolt (2 pcs)
washer (2 pcs.)
Mark
Projector plate
5. Adjusting the length of the arm
1)
Loosen the screw on the arm. (
2)
Adjust the length of the arm using the measure on the bottom to match the projection distance recommended in "Screen
Size and Projection Distance" on page 6. (
3)
Secure the arm position temporarily using the screw on top. (
6. Connecting the power cable and other cables to the projector
×
12 mm bolts as shown below.
Adjustment unit
)
)
)
9