Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
speaker. The space adjacent to the amplifier
must either be ventilated or sufficiently large to
dissipate heat so that the ambient temperature
does not rise above 35 degrees Celsius (95°F).
Mounting options
G Three, G Four and G Five offer several
mounting options: The Iso-Pod™ (Isolation
Positioner/Decoupler™) vibration insulat-
ing table stand allows tilting the loudspeaker
for correct vertical alignment. There are three
mounting points for the Iso-Pod™ on the back
of the loudspeaker cabinet allowing vertical and
symmetrical horizontal positioning. On the base
of the loudspeaker is a 3/8" UNC (M10 on the G
Four and G Five) threaded hole compatible with
a standard microphone stand. On the rear there
are two sets of threaded holes for Omnimount®
and König & Meyer brackets.
Maintenance
No user serviceable parts are to be found within
the amplifier unit. Any maintenance or repair of
the unit should only be undertaken by qualified
service personnel.
Safety considerations
Although the G Three and G Four have been
designed in accordance with international
safety standards, the following warnings and
cautions should be observed to ensure safe
operation and to maintain the loudspeaker
under safe operating conditions:
• Servicing and adjustment must only be
performed by qualified service personnel.
• The loudspeaker must not be opened.
• Do not use this product with an unearthed
mains cable or an unearthed mains
connection as this may compromise
electrical safety.
• Do not expose the loudspeaker to water or
moisture. Do not place any objects filled with
liquid, such as vases on the loudspeaker or
near it.
• This loudspeaker is capable of producing
sound pressure levels in excess of 85
dB, which may cause permanent hearing
damage.
• Free flow of air behind the loudspeaker is
necessary to maintain sufficient cooling. Do
not obstruct airflow around the loudspeaker.
Note that the amplifier is not completely discon-
nected from the AC mains service unless the
mains power cord is removed from the amplifier
or the mains outlet.
WARNING!
This equipment is capable of producing sound
pressure levels in excess of 85 dB, which may
cause permanent hearing damage.
Compliance to FCC rules
This device complies with part 15 of the FCC
Rules. Operation is subject to the following con-
ditions:
• This device may not cause harmful
interference, and
• This device must accept any interference
received, including interference that may
cause undesired operation.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide rea-
sonable protection against harmful interference
in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency
energy and, if not installed and used in accord-
ance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equip-
ment does cause harmful interference to radio
or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Modifications not expressly approved by the
manufacturer could void the user's authority to
operate the equipment under FCC rules.
Guarantee
This product is guaranteed for a period of two
years against faults in materials or workman-
ship. Refer to supplier for full sales and guar-
antee terms.
Inhaltsverzeichnis
