Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
ADDITIONAL FUNCTIONS
USeR/APPLICATION SPeCIFIC PROFILeS
on the Leica M9, any combination of all main and
image parameters menu settings can be permanently
stored, e.g. so that they can be retrieved quickly and
easily at any time for recurring situations/subjects. A
total of four memory slots are available for such com
binations. The names of these four profiles are gene
rally made up of ten characters. In the factory default
setting, the first is named Profile__1_
Profile__2_
1
, and so on. However, you can change
the preset names on the camera, e.g. to your specific
applications. This makes it easier and quicker for you
to identify and retrieve them.
To simplify the presets, a snapshot profile is also
available (see p. 102/141).
1
The underscores "_" are used as placeholders here, in the monitor
all "unused" spaces are blank.
applying settings/Creating a profile
1. Set the desired functions in the main and image
parameters menus.
2. In the main menu (see p. 102/119), select Save
user profile (4.1.2), and
3. the desired memory slot in the submenu.
• The profile name appears. The cursor is at the
first character, which can be edited.
4. Use the up and down direction buttons (1.30) and/
or the central setting dial (1.29) to change the
1
, the second
characters and the left and right direction buttons
to move the cursor.
• The available characters are upper case letters
from A to Z, lower case letters from a to z and
figures from 0 to 9; they are arranged in a contin
uous loop in this order.
5. Save your settings by pressing the
(1.21).
Selecting a saved profile or the snapshot profile
1. In the image parameters menu (see p. 103/119),
select User profile (4.2.6), and
2. the desired profile in the sub-menu.
Notes:
• If you change one of the settings for the profile
currently in use, the corresponding figure is cleared.
• When the snapshot profile is activated, you can exit
it at any time by pressing the
ReSeTTINg ALL CUSTOM SeTTINgS
This function allows you to simultaneously delete all
previous user settings made in the main and image
parameters menus and reset them to the factory
default settings.
Setting the function
1. In the main menu (see p. 102/119), select Reset
(4.1.20), and
2. then press the
relevant submenu.
SET
button
3. Then use the left/right direction buttons (1.30) to
select the desired function, and
4. confirm your selection by pressing the
again.
Note:
This reset also affects any individual profiles defined
and saved using the Save user profile function (4.1.2,
see above).
Additional functions / Profiles / 149
button (1.21).
SET
button (1.21) to call up the
SET
button
SET
Kapitel
Inhaltsverzeichnis
