Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
Flash exposure control
Flash unit connection Via accessory shoe with
center and control contacts.
Synchronization Optionally triggered at the first or
second shutter curtain.
Flash sync speed
=
1
/
s; longer shutter speeds
180
available.
Flash exposure metering (with SCA3501/3502
a dapter or SCA-3000 standard flash unit, e.g.
Leica SF 24d/Leica SF 58). Control with center
weighted TTL-pre-flash metering.
Flash measurement cell 2 silicon photo diodes with
collection lens in camera base.
Flash exposure compensation ± 3
steps adjustable on the SCA3501/3502 adapter.
on Leica SF 24d, ± 3 eV in
1
/
eV steps with com
3
puter control, or from 0 to –3eV in 1eV steps/on
Leica SF 58 adjustable in all modes ±3eV in
steps.
Displays in flash mode Readiness: flash symbol
LED in the viewfinder constantly lit; confirmation of
suc cess: By the LED remaining lit or flashing rapidly
for a while after taking the picture; underexposure
display by the Led going out for a while.
Viewfinder
Viewfinder principle Large, brightline frame view
finder with automatic parallax compensation.
eyepiece Adjusted to 0.5 dptr. Correction lenses
from –3 to +3 dpt. available.
Image field limitation By activating two brightline
frames: For 35 and 135 mm, or for 28 and 90 mm, or
for 50 and 75 mm. Automatic activation when lens is
attached. Any pair of brightline frames can be acti vated
using the image field selector.
Parallax compensation The horizontal and vertical
difference between the viewfinder and the lens is
automatically compensated according to the relevant
distance setting, i.e. the viewfinder bright-line auto
1
/
eV in
1
/
eV
matically aligns with the subject detail recorded by
3
3
the lens.
Matching of viewfinder and actual picture The
size of the brightline frame corresponds exactly to
1
/
eV
3
the sensor size of approx. 23.9 x 35.8 mm at a setting
distance of 1 meter. At infinity setting, depending
on the focal length, approx. 7.3 % (28 mm) to 18 %
(135 mm) more is recorded by the sensor than indi
cated by the corresponding brightline frame and
slightly less for shorter distance settings than 1 m.
enlargement (for all lenses) 0.68 x.
Large basis range finder Split or superimposed
image range finder shown as a bright field in the
center of the viewfinder image.
effective measurement basis 47.1 mm (mechanical
measurement basis 69.25mm x viewfinder enlargement
0.68x).
Displays
Viewfinder (lower edge) LED symbol for flash status.
Fourdigit sevensegment digital display with dots
a bove and below, display brightness adjusted for
ambient brightness, for: warning of exposure com
pensation, display for automatically generated shutter
speeds in aperture priority mode, indication of use
of metering memory lock, warning that the metering
or setting ranges are overshot or undershot using
aperture priority and counting down exposures longer
than 2 s.
Led light balance with two triangular and one central
circular Led for manual exposure setting. The triangu
lar Leds give the direction of rotation of the aperture
setting ring and shutter speed setting dial to adjust
the exposure. Also for warning of when the metering
range is overshot or undershot.
On rear panel 2,5" monitor (color TFT LCd) with
230.000 pixels, for displays see p. 98.
Technical data / 175
Kapitel
Inhaltsverzeichnis
