Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
b) Setting the Time
• Keep the button "SET" (3) pushed for approx. 3 seconds to start setting
mode. The upper left of the display shows "SET" and the upper display line
shows "24 Hr".
Setting can be discontinued early by pushing the button "SET" (3) again
for approx. 3 seconds. The settings made are accepted.
Alternatively, do not push any button for one minute to leave setting
mode automatically; the previous settings are assumed as well.
If the meter is in the forecast mode (display "FORECAST"), the setting
mode cannot be called. Leave the forecast mode first by pushing the
button "OK" (2) for 3 seconds until "CURRENT" appears.
• Briefly push the button "SET", and the display "24" or "12" will flash.
• Use the button "
time. In 12h-mode, "PM" is displayed next to the time during the second half
of the day.
• Briefly push the button "SET"; the hours will flash.
• Set the hours with the button "
• Briefly push the button "SET"; the minutes will flash.
• Set the minutes with the button "
• Briefly push the button "SET" (3) for confirmation; the display will stop flash-
ing.
• Briefly push the button "
the next section c).
To leave setting mode, keep the button "SET" (3) pushed for 3 seconds (or do
not push any button for 1 minute).
" (6) or "
" (5) of the 12h or 24h mode for displaying the
" (6) or "
" (6) or "
" (5) to get to the setting of the power tariff (see
" (5).
" (5).
43
Kapitel
Inhaltsverzeichnis
