Dometic PERFECTVIEW M55LX Montage- Und Bedienungsanleitung Seite 17
Vorschau ausblenden
Andere Handbücher für PERFECTVIEW M55LX:
- Bedienungsanleitung (248 Seiten) ,
- Montage- und bedienungsanleitung (248 Seiten)
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
PerfectView M55LX, M75LX
• To prevent damage to the cables, when laying them ensure that there is always sufficient
distance to vehicle components which can become hot (lights, heaters, ventilators etc.).
• When laying the cables (fig. 3, page 3), make sure:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged ducts without protection.
Connecting the monitor as a reversing video system (fig. d, page 7)
➤ Lay the connection cable for the monitor bracket on the dashboard.
➤ Insert the plug of the monitor cable (2) into the socket (4) of the connection cable (3).
Wait until you hear the plug snap in.
A
NOTICE! Beware of damage
Make sure the polarity is correct when connecting to a voltage source.
➤ Connect the red and black cables of the connection cable to a suitable voltage supply:
– Connect the red cable (5) to terminal 15 (ignition).
– Connect the black cable (6) to terminal 31 (earth).
➤ If the monitor is to be activated when reverse gear is selected, connect the green cable (7) to
the positive cable of the reversing light.
I
NOTE
If voltage is present in the green cable (7), the reversing camera will be activated
automatically. The reversing camera has priority.
➤ If the monitor is to be activated e.g. when the indicator is flashing, connect the following
control cable to a positive cable of the indicator:
– white cable (8), blue cable (13)
I
NOTE
If voltage is present in this control cable, the video input CAM2 and CAM3 will be
activated.
EN
Installing the LCD monitor
17
Kapitel
Inhaltsverzeichnis
