Audio com
Connecting the components to the electronics box
The individual components are connected to the electronics box as follows:
• Insert the microphone coupler
symbol
• Insert the display cable
• Inset the connection cable set
• Screw on the antenna cable
Inserting a SIM card
If you do not have a Bluetooth
card into Audio com. To do this, open the SIM drawer on the electronics box
using a pen or other sharp object. Insert the SIM card into the drawer with the
contacts facing upwards. To make sure you do not accidentally insert the card
the wrong way round, look for the bevelled corner on the SIM drawer and on
the SIM card itself. Push the SIM drawer back into the electronics box, with the
card facing downwards.
Test for Correct Functioning
The test for correct functioning is only possible when the system has been
connected to a compatible Bluetooth
section further on in this manual to find out how to proceed.
1
into the jack bush with the microphone
2
into one of the two jacks until it locks in place
3
to the antenna and screw together firmly
4
4
2
®
telephone, you have the option to insert a SIM
®
phone. Please refer to the relevant
-65-
3
1
Installation