Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
5. Maintenance
･Refer to
"3.
Cautions" regarding use.
･Refer to
"5.3. Error Code
･Refer to the [FG-CWP Series Instruction Manual] on the A&D website (https://www.aandd.jp) for sensitivity
adjustment.
･ Periodically check the accuracy of weighing. Adjust the scale, if it is moved to another location or the
environment has changed.
5.1. Repair
Do not disassemble / assemble the scale without an authorized service engineer. Doing so may cause
an electric shock or damage to the scale, etc. In this case, repair is not covered under warranty. Contact
your local A&D dealer if your scale needs service or repair.
5.2. Error display
In this situation
Nothing displayed.
Scale does not turn on.
The scale does not display
zero at first.
is displayed.
is displayed.
is displayed.
is displayed.
is
displayed and does not
proceed.
Fixed display.
Table" and corresponding mode for displayed error code.
･Is the main power the correct voltage?
･Is the main power cord properly connected?
･Check around the weighing pan.
･Is there anything on the weighing pan?
･Refer to the [FG-D-CWP Instruction Manual] on the A&D website
(https://www.aandd.jp) and perform zero point sensitivity adjustment.
･Weighing error that meaning "Over loaded."
･Indicates that the sample weight is too light to set the unit weight in the
counting mode.
･Sensitivity adjustment error that meaning "Too light."
･Displayed when the main power drops.
･The weighed value is unstable due to drift, vibration or other factors.
A breeze or vibration may be affecting measurement.
Check around the weighing pan.
･Check the connection of the load cell cable.
･No zero display when the display is turned on.
Remove anything that is on the pan.
･Refer to the [FG-D-CWP Instruction Manual] on the A&D website
(https://www.aandd.jp) and perform zero point sensitivity adjustment.
･Did you use the "hold function" ?
Refer to the [FG-CWP Series Instruction Manual] on the A&D website
(https://www.aandd.jp) and change the function
･Turn off scale and turn it on again.
EN
Confirm these items
8
.
Inhaltsverzeichnis
